Stopping a Slow Filter Leak at the Source in Hemet, CA

A small part can cause a big headache. On this Hemet job, the filter drain plug had worn out and started letting water seep every time the system ran. It is one of those problems that is easy to overlook because the drip looks minor at first. Over time though, that steady seep adds up. The pool loses water it needs, the filter struggles to hold proper pressure, and the pump ends up working harder than it should just to keep things moving.

When we got out there, the plug and the surrounding threads had taken on wear and were no longer sealing the way they should. Water was escaping right at the base of the filter every time the system kicked on. We pulled the old plug, cleaned up the threads so the new seal would seat properly, and installed a fresh drain cap rated to hold tight under pressure. Once it was back together, the leak was gone and the filter came right back up to full pressure.

While we had eyes on the equipment, we went ahead and gave the rest of the filter a full once over. We checked the housing, the seals, and the connections around it to make sure nothing else was worn thin or getting ready to fail. Catching a second small issue during a visit like this is exactly how we keep a minor repair from turning into an expensive one down the road.

A leaking filter is rarely just a filter problem. Wasted water, low pressure, and an overworked pump all trace back to it. Getting the seal right keeps the whole system healthy and your water where it belongs. If you want your filter cleaned, resealed, or fully serviced, Aqualux Pool Care keeps pools running right across Hemet and the greater San Jacinto Valley, CA.